The D6 dynamic instrument microphone is used for stage, studio and broadcast applications. Designed with a cardioid pickup pattern for isolation and feedback control, the D6 drum microphone is equipped with a VLM™ diaphragm for natural, accurate sound reproduction.

Lightweight, compact and easy to position, the D6 cardioid microphone is an excellent choice for miking instruments requiring extended low frequency reproduction such as kick drums, large toms and bass cabinets. The D6's transformer less design, low impedance and balanced output allow for interference-free performance.

Designed, assembled, and tested by Audix in the USA.

What's in the Box?

• 1 x D6 Instrument Microphone
• 1 x DCLIP Microphone Clip
• 1 x P1 Carrying Pouch

Product Specifications

General

• Transducer Type: Dynamic
• Frequency Response: 30 Hz - 15 kHz
• Polar Pattern: Cardioid
• Output Impedance: 280 ohms
• Sensitivity: 0.8 mV / Pa @ 1k
• Capsule Technology: WLM Type E
• Off Axis Rejection: >20 dB
• Maximum SPL: ≥144 dB
• Power Requirements: None
• Connector: 3-pin XLRm
• Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector

Physical & Dimensions

• Materials: Finish Machined Aluminium / Black Finish
• Weight: 254 g / 8.9oz
• Length: 117 mm / 4.6 in

The D2 dynamic instrument microphone is used for stage, studio and broadcast applications. It is designed with a Hypercardioid pickup pattern for isolation and feedback control and is equipped with a VLM™ diaphragm for natural, accurate sound reproduction.

The D2 is an excellent choice for miking instruments with a percussive nature such as rack toms, congas, saxophones, guitar cabinets and brass. Transformer less design, low impedance and balanced output insure that the D2 Hypercardioid instrument microphone will perform interference-free.

What's in the Box?

• 1 x D2 Instrument Microphone
• 1 x DCLIP Microphone Clip
• 1 x P1 Carrying Pouch

Product Specifications

General

• Transducer Type; Dynamic
• Frequency Response: 68 Hz - 18 kHz
• Polar Pattern: Hypercardioid
• Output Impedance: 280 ohms
• Sensitivity: 1.2 mV / Pa @ 1k
• Capsule Technology: VLM Type B
• Off-Axis Rejection: >30 dB
• Maximum SPL: ≥144 dB
• Power Requirements: None
• Connector: 3-pin XLRm
• Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector

Physical & Dimensions

• Materials: Finish Black Hard Coat
• Weight: 128 g / 4.5 oz
• Length: 100 mm / 3.9 in

With a wide frequency response of 40 Hz - 18 kHz and the ability to handle SPLs in excess of 144 dB, the D4 dynamic instrument microphone is an excellent choice for miking instruments requiring precise, low frequency reproduction such as large rack toms, floor toms, cajon, djembe, tympani, leslie bottom, bass flute, saxophone and baritone saxophone, trombone, acoustic bass, bass cabinets and small kick drums.

The D4 is lightweight, compact and easy to position. Used for stage, studio and broadcast applications, the D4 dynamic instrument microphone is designed with a Hypercardioid pickup pattern for isolation and feedback control. The D4 Hypercardioid is also equipped with a VLM™ diaphragm for natural accurate sound reproduction.

What's in the Box?

• 1 x D4 Instrument Microphone
• 1 x DCLIP Microphone Clip
• 1 x P1 Carrying Pouch

General

• Transducer Type: Dynamic
• Frequency Response: 40 Hz - 18 kHz
• Polar Pattern: Hypercardioid
• Output Impedance: 280 ohms
• Sensitivity: 1.4 mV / Pa @ 1k
• Capsule Technology: VLM Type D
• Off Axis Rejection: >20 dB
• Maximum SPL: ≥144 dB
• Power Requirements: None
• Connector: 3-pin XLRm
• Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector

Physical & Dimensions

• Materials: Finish Black Hard Coat
• Weight: 128 g / 4.5 oz
• Length: 100 mm / 3.9 in

Audix revolutionized drum and percussion miking by designing instrument-specific microphones. With the introduction of the Fusion Series, Audix created two attractively priced packages for today’s up and coming professionals.

The FP7 Drum Pack contains a combination of f2, f5 and f6 dynamic microphones and the f9 condenser for overheads. The f5 is tuned for snare drum and can be used as well for bongos, timbales, guitar cabinets and acoustic instruments; the f2 dynamic microphone is ideally suited for rack and floor toms, congas, djembe, bongos, timbales, brass and woodwind instruments. The f6, with its extended bass response, is designed for kick drum, bass cabinets, Cajon and other low-frequency instruments. The f9 condenser microphone is intended for cymbals and hi-hat.   

Built to withstand the rigours of live stage applications, the Fusion Series microphones are also excellent for rehearsal, school, House of Worship and a wide variety of home recording applications.

What's in the Box?

• 1 x f5 Snare Microphone
• 3 x f2 Rack and Floor Tom Microphones 
• 1 x f6 Kick Drum Microphone
• 2 x f9 Overheads Microphones
• 6 x DCLIP Microphone Clips
• 4 x DFLEX Microphone Clips
• 1 x MC1 Microphone Clip
• Aluminium Road Case

The DP5A professional drum microphone pack contains five microphones required to mic a standard rock kit: kick, snare, rack toms and floor tom. Perfect for stage or studio, this selection of dynamic drum microphones features exclusive Audix VLM capsule technology offering accurate sound reproduction in very high SPL applications. Microphone clips, mounts and rugged aluminium carrying case are included.

What's in the Box?

• 1 x D6 Kick Drum Microphone
• 1 x i5 Snare Drum Microphone 
• 2 x D2s Rack Tom Microphones 
• 1 x D4 Floor Tom Microphone
• 4 x DVICE Rim Mounts
• 1 x DCLIP Microphone Clip 
• Aluminium Road Case

The DP7 professional drum microphone pack represents an outstanding combination of seven microphones designed to meet the demands of today's professional drummer, both on the stage and in the studio.
Included in the DP7 drum microphone package is the D6, Audix's flagship kick drum microphone, two – D2 dynamic drum microphones for rack toms, one D4 for floor tom, the i5 for snare and a pair of ADX51 studio condenser microphones for overhead miking. Also included are four D-Vice rim mount clips for the snare and tom microphones, and three heavy duty tension fit microphone clips for the other three microphones. Everything is conveniently packaged in a foam-lined aluminium road case for safe keeping when the microphones are not in use.

What's in the Box?

• 1 x D6 Kick Drum Microphone
• 1 x i5 Snare Drum Microphone
• 2 x D2 Rack Tom Microphones
• 1 x D4 Floor Tom Microphone 
• 2 x ADX51 Overhead Microphones
• 4 x DVICE Rim Mounts
• 3 x DCLIP Microphone Clips
• 1 x MC1 Microphone Clip
• 2 x WS81C Windscreens
• Aluminium Road Case
• "How to Mic Your Drums" DVD

• General

  • Audio frequency bandwidth: 20 - 17000 Hz
  • Sensitivity: 1.8 mV/Pa
  • Electrical impedance: 210 Ohms
  • Recommended load impedance: 2000 Ohms
  • Polar Pattern: Cardioid
  • Pro Studio: Yes
  • Project Studio: Yes
  • Live Instrument: Yes
  • Type: Balanced XLR
  • Gender: Male
  • Contacts: 3-pin

  Physical & Dimensions

  • Length: 115mm
  • Height: 126mm
  • Diameter: 70mm
  • Weight: 300g
  
  

What's in the box?

• 1 x C518 M Microphone
• 1 x Mini-to-Standard XLR Cable (3 m/10 ft.)
• 1 x H518 Drum Bracket
• 1 x W44 Windscreen
• 1 x Microphone Bag

General

• Audio frequency bandwidth: 60 - 20000 Hz
• Equivalent noise level: 31 dB-A
• Sensitivity: 5 mV/Pa
• Signal to Noise: 63 dB-A
• Electrical impedance: 200 Ohms
• Recommended load impedance: 2000 Ohms
• Polar Pattern: Cardioid
• Type: Mini XLR
• Gender: Female
• Contacts: 3-pin
• Body: metal
• Finish: matte black
• Voltage: 9 to 52 V
• Current: 2 mA

Physical & Dimensions

• Width: 47mm
• Height: 200mm
• Weight: 220g

The Drum Set Session I is a high-performance drum microphone set and the ideal all-in-one starter kit that delivers an impressive combination of performance and value. With seven microphones and accessories packed in a durable aluminum carrying case, it provides all the essentials needed to capture a complete drum set. It can also be used for miking percussion, bass and guitar amps, brass, woodwinds and other instruments. All microphones are from the Perception Live series and feature a durable metal casing, rugged spring steel microphone grill, scratch-resistant finish and high maximum SPL capabilities. The set contains: 1 x P2 bass drum microphone, 2 x P17* for overheads, and 4 x P4 for toms and snare. *The P17 is technically identical to the P170 and is not available as a single unit.

What's in the box?

• 1 x P2 Bass Drum Microphone
• 2 x P17 Microphones for overheads (The P17 is technically identical to the P170 and is not available as a single unit.)
• 4 x P4 Microphones For Toms And Snare
• 1 x H440 Adapter Plate
• 1 x Stand Adapter
• 1 x Aluminum Carrying Case

P2

• General
  • Audio frequency bandwidth: 20 - 16000 Hz
  • Sensitivity: 2.5 mV/Pa
  • Electrical impedance: 400 Ohms
  • Recommended load impedance: 2000 Ohms
  • Polar Pattern: Cardioid
  • Type: Balanced XLR
  • Gender: Male
  • Contacts: 3-pin
  • Body: metal
  • Finish: black
• Physical & Dimensions
  • Length: 130mm
  • Height: 132mm
  • Diameter: 60mm
  • Weight: 400g

P17

• General
  • Audio frequency bandwidth: 20 - 20000 Hz
  • Equivalent noise level: 19 dB-A
  • Sensitivity: 15 mV/Pa
  • Signal to Noise: 75 dB-A
  • Preattenuation Pad: -20 dB
  • Electrical impedance: <= 200 Ohms
  • Recommended load impedance: >=1000 Ohms
  • Polar Pattern: Cardioid
  • Voltage: 44 to 52 V
  • Current: <= 3 mA
  • Type: Balanced XLR
  • Gender: Male
  • Contacts: 3-pin
• Physical & Dimensions
  • Height: 160mm
  • Diameter: 22mm
  • Weight: 130g

P4

• General
  • Audio frequency bandwidth: 40 - 18000 Hz
  • Sensitivity: 2.5 mV/Pa
  • Electrical impedance: 500 Ohms
  • Recommended load impedance: 2000 Ohms
  • Polar Pattern: Cardioid
  • Body: metal
  • Finish: black
• Physical & Dimensions
  • Length: 110mm
  • Height: 78mm
  • Diameter: 44mm
  • Weight: 245g

• General

  • Sensitivity in free field, no load (1 kHz):  0.25 mV/Pa
  • Sensitivity in free field, no load (50 kHz):  0.9 mV/Pa
  • Nominal impedance:  350
  • Min. terminating impedance:  1 kΩ
  • Pick-up pattern:  cardioid
  • Frequency Response:  20 – 16,000 Hz

  Physical & Dimensions

  • Dimensions:  153 x 60 (length x maximum diameter) mm.
  • Weight:  318g.

• General

  • Transducer principle (Microphone):  pre-polarised condenser microphone
  • Pick-up pattern:  half-cardioid
  • Frequency response:  20...20 000 Hz
  • Sensitivity in free field, no load (1kHz):  0.5 mV/Pa
  • Nominal impedance:  < 100 Ohm
  • Min. terminating impedance:  1000 Ohm
  • Max. Sound pressure level (active):  154 dB / SPL
  • Phantom powering:  48 V / 1.1 mA

  Physical & Dimensions

  • Connector:  XLR-3
  • Dimensions:  126.5 x 105 x 26.5 mm
  • Weight:  550 g
  
  

The Carlsbro DM7 Drum Microphone Set is a high quality set of microphones for use with Carlsbro electronic drum kits. The set itself features seven drum microphones including a bass drum microphone, four tom/snare drum microphones, two condenser microphones for overhead and two mic stand clips, not only that the set comes with a protective hard aluminium carry case which includes a foam filled centre, making it ideal to protect your microphones when not in use or when transporting them from gig to gig. Opting to work with professional sets of drum microphones benefits your recording and sound output ten fold and professional microphones really do pick up and deliver the tones and subtleties of your music in such greater depth, it has to be heard to be believed.

FEATURES:

The EAD10 acoustic electronic drum module instantly transforms your acoustic drum kit into a powerful digital/electronic hybrid with sampled sounds and studio quality digital effects. It allows you to play and record your acoustic drums along with your favorite artists from your music library or from tracks from your friends and share them digitally.

With the free iOS app you can shoot, edit and upload videos of your drum performances.

The EAD10 enhances every aspect of your drumming – the way you practice, record and perform live and makes your acoustic drums do more.

Shop all Yamaha products at Into Music Drum Store

The EAD10 acoustic electronic drum module instantly transforms your acoustic drum kit into a powerful digital/electronic hybrid with sampled sounds and studio quality digital effects. It allows you to play and record your acoustic drums along with your favorite artists from your music library or from tracks from your friends and share them digitally.

With the free iOS app you can shoot, edit and upload videos of your drum performances.

The EAD10 enhances every aspect of your drumming – the way you practice, record and perform live and makes your acoustic drums do more.

Yamaha DT50S

The Yamaha DT50S Piezo Acoustic Drum Trigger is a simple way of transforming your acoustic kit into a modern electronic kit with access to a huge range of different sounds using a trigger module. Simply attach the DT50S to the rim of an acoustic snare, tom, or floor tom to transmit a trigger signal to your trigger module. A polished chrome finish and low-profile lug-style design give the DT50S a clean and professional look.

Shop this exclusive bundle deal at Into Music Drum Store

Features

• Cardioid polar pattern
• Ideal for variety of instruments
• Zinc alloy body construction
• 5 metre cable with XLR connections
• Unobtrusive black finish

Specifications

• Cartridge: DC18, Moving Coil
• Polar Pattern: Cardioid
• Sensitivity: -54dB +/- 3dB (0dB = 1 V/Pa At 1kHz)
• Frequency Response: 50Hz - 15kHz
• Output Impedance: 600Ω
• Connector: Balanced XLR Output
• Body: Zinc Alloy
• Cable: 5 m
• Colour: Black

High quality Stagg microphone XLR cable available in various lenghts. 

Drum mount microphone holder

Black metal holder to secure microphones to drums - Easy to mount and remove - Rubber inserts to absorb to ambient noise and shocks - Adjustment screw w/ 5/8" thread adaptor - Height: 60 to 100mm / 2,3 to 3,9 in. - Weight: 190g / 6,7oz.

The MEINL Mic Rim Clamp features the same sturdy and reliable mounting mechanism as the classic Rim Clamp but comes outfitted with added hardware for precise microphone placement on congas, drum kits, and marching percussion.

Low profile microphone stand w/ telescopic boom

- 2 section w/ folding legs - Height range 50 cm to 82 cm / 19.7 to 32.3 in - Max arm extension: 44 to 84 cm / 17.3 to 33.1 in - 3/8" mounting thread - Weight : 3 Kg / 6.6 lb

 The EAD50 is the latest high-end model and takes the EAD concept even further. It captures and processes your acoustic sound with refined precision, merging it seamlessly with electronic sources to create a true hybrid drumming experience. With real-time control and intuitive operation, drummer can easily shape their own sound in professional quality as they play—on stage, in the studio, during lessons, rehearsals or while streaming. From professionals to advanced amateurs, EAD50 empowers every drummer to achieve their ideal sound.

Capture multitrack audio via USB, sample or loop your own playing, and connect wirelessly through Bluetooth to work seamlessly with the EAD Touch App and
Rec’n’Share. It supports not only live PA operation, but also home practice, online lessons, studio recording, social media content creation, workshops, and seminars with equal flexibility.

The DSU50’s high-quality condenser microphone with custom matched-pair capsules and FET, combined with its high-precision kick trigger, captures your entire kit from a single point with clean stereo imaging and accurate low-end articulation.

D6 Dynamic Kick Drum Microphone

The D6 dynamic kick drum microphone has a frequency response of 30Hz - 15kHz and a cardioid pickup pattern. It is easy to position and doesn't rely on finding the drum's 'sweet spot'. The microphone features the same legendary VLM technology that has made the D Series microphones so popular for stage and studio.

I5 Dynamic Snare Microphone

The I5 dynamic snare microphone has a cardioid polar pattern that focuses it on the instrument in question while isolating it from the others on the stage. It has a smooth and uniform frequency response of 50Hz - 16kHz and can handle sound pressure levels in excess of 140dB.

D2 Dynamic Tom Microphones

The D2 dynamic rack tom microphone brings out the natural, dynamic sound of toms or congas thanks to its natural warmth. It avoids the typical muddy 'boom' that can mar a good stage mix or recording. The D4 dynamic floor tom microphone has a frequency response of 40Hz - 18kHz, allowing it to successfully capture the true sound of instruments that require bass reproduction. It is lightweight and easy to position.

Condensor Microphones

The SCX1C pencil condenser is a highly-sensitive microphone with a cardioid pickup pattern and a smooth, uniform frequency response of 40Hz - 20kHz. It requires 48-52 Volts of phantom power. The SCX1HC condenser microphone is considered by many sound engineers to be the perfect choice for hi-hat. With a hypercardioid pickup pattern for isolation and feedback control, it provides an astonishing level of detail and realism.

Features

• All-in-one solution for miking drums
• Instrument-specific mics for optimal results
• Rugged Audix quality
• Great for stage and studio
• Dflex clips for easy positioning
• Road case

Contents

• 1 x D6 dynamic microphone with DCLIP
• 1 x I5 dynamic microphone with DVICE rim mount clip
• 2 x D2 dynamic microphones with DVICE rim mount clips
• 1 x D4 dynamic microphone with DVICE rim mount clip
• 2 x SCX1C condenser microphones with DCLIPs and windscreens
• 1 x SCX1HC condenser microphone with DCLIP and windscreen
• Foam-lined Aluminium road case