Into Music Store

(Ex display) Ludwig classic oak drum kit in white marine. We believe this to be the only one available in the uk in this finish at the moment!!

FEATURES

3-piece drum shell pack with rack tom, floor tom and kick

5-ply, 6.5 mm shells made from maple and oak for extra-dark sound

Double-cut 45° bearing edges contribute to quick, punchy decay

Made in the USA

Cymbals, snare and cymbal stand not included

Includes

20 x 14 BD

14 x 14 FT

12 x 8 TT

Part of the reimagined Classic Oak drum series, this Ludwig Downbeat 3-piece shell pack lives up to the timeless Ludwig name with high-end construction and dark, aggressive sound. The shell consists of a 3-ply core of North American Maple, surrounded by single inner and outer plies of American Red Oak. The total of 5 wood plies keeps the shells thin at 6.5 mm, increasing the dark resonance and speeding up the decay for clear articulation on every stroke. Shells are cut to dual 45-degree bearing edges. This "Downbeat" configuration features a rack tom, floor tom and bass drum in fusion sizes, especially good for situations that reward subtlety and precision. Cymbals, snare drum and hardware are not included with this high-end professional shell pack. No matter the genre, Ludwig Classic Oak gives drummers a more powerful voice in the mix. Proudly made in Monroe, North Carolina, USA.

The SONIClear™ technology used on the rack tom mounts and floor tom legs increases overall resonance by preserving vibration in the drumheads and shell whilst preventing energy transference to the hardware. This gives 100% breathing room for your hybrid shells to sing with the utmost resonance for an impressively musical and ‘full’ tone.

Features

• Birch / maple / birch hybrid shells give you crisp, cutting tone balanced with a deep, warm tone for a ‘full’ and musical sound
• SONIClear™ tom suspension and floor tom feet give you maximum resonance
• SONIClear™ bearing edge provide great tuning stability and a stronger drum sound
• Minimal contact hardware allows your drums natural tone to be heard
• Black Dawn finish provides a bold lacquered appearance for your stage shows

Configuration

• Snare drum: 14’’ x 5.5’’
• Bass drum: 22’’ x 18’’
• Rack tom 1: 10’’ x 7’’
• Rack tom 2: 12’’ x 8’’
• Floor tom 1: 14’’ x 12’’
• Floor tom 2: 16’’ x 14’’

Specifications

• Shells: Birch / maple / birch
• Snare shell: steel
• Shell ply:
• Toms: 6-ply 7.2mm
• Bass drum: 8-ply
• Hoops: 2.3mm Powerhoop
• Bearing edge: SONIClear™
• Finish: Black Dawn

Birch wood construction offers a cutting low-end sound

The Yamaha Stage Custom shells are constructed from 6 plies of 100 birch wood which is a classic wood choice for drums because of its boosted high frequencies and good low end. It's ideal for applications requiring extra presence and cut. It's a classic choice for high end drum kits but the Stage Custom is affordable enough for anyone from students to more established players.

Compact size - ideal for travel

These small diameter shells deliver the Stage Custom sound without compromise. They are ideal for jazz, light sessions work and small venues or as a great all-round second kit for a wide variety of musical styles. The shells can be tuned higher and make less noise than bigger drums, making them perfect for music that requires something 'light and tight'.

Yamaha Hardware

The tom is mounted via the YESS system which helps eliminate potential dampening that happens when the hardware is drilled directly into the shell and gives the tom more resonance and volume.

A tribute to Yamaha design technology, their original ball mount and clamp has gone through very few modifications over the years. A large, ultra-hard resin ball sits in an attractive chromed housing, held in place with a titanium ergonomic wing bolt. It is the ultimate drummer-friendly mount, offering non-slip positioning virtually anywhere. It also permits tuning of the bottom head by simply rotating the drum.

New Stage Custom also adopts die-cast claw hooks with rubber insertion plates to reduce noises. The bass drum legs of Stage Custom have special stoppers to make setting easier. all the heads are Remo which ensures reliable and consistent tone and performance.

Configuration

• Bass Drum: 20'' x 8''
• Floor/Snare: 13'' x 8''
• Rack Tom: 10'' x 5''
• Snare Drum: 13'' x 5''

Specifications

• Shell Construction: 100 Percent 6-Ply Birch
• Shell Sizes: 20'', 13'', 13'', 10''
• Hoops: Triple Flange Hoop Steel / 1.5mm (FT/RT) & Wood Hoop (BD)
• Lugs: One-piece with Lug Insertion Plate
• Clamp: All Round Ball Clamp (Long Rod)
• Included Equipment: Tom Mount
• Finish: Natural Wood

A compact sized kit that is perfect for travel, busking and home practice. The Yamaha Stage Custom Hip shell pack features 6-ply birch wood construction for a cutting low-end sound that balances out with sustained overtones. The floor tom is equipped with 20-strand snare wires, allowing you to transform your floor tom into a deep, 13” snare drum with only a single action! Cool AF!

Hip Shell Pack Sizes:

• Bass Drum: 20” x 8”
• Floor Tom: 13” x 8”
• Rack Tom: 10” x 5”
• Snare Drum: 13″ x 5″
• Hardware: CL945LB Tom Arm

Specifications:

• Shell Construction: 6-Ply Birch
• Hoops: Triple Flange Hoop Steel / 1.5mm (FT/RT) & Wood Hoop (BD)
• Lugs: One-piece with Lug Insertion Plate
• Clamp: All Round Ball Clamp (Long Rod)
• Included Equipment: Tom Mount

Compact size – ideal for travel

These small diameter shells deliver the Stage Custom sound without compromise. They are ideal for jazz, light sessions work and small venues or as a great all-round second kit for a wide variety of musical styles. The shells can be tuned higher and make less noise than bigger drums, making them perfect for music that requires something ‘light and tight’.

Yamaha hardware

The tom is mounted via the YESS system which helps eliminate potential dampening that happens when the hardware is drilled directly into the shell and gives the tom more resonance and volume.

A tribute to Yamaha design technology, their original ball mount and clamp has gone through very few modifications over the years. A large, ultra-hard resin ball sits in an attractive chromed housing, held in place with a titanium ergonomic wing bolt. It is the ultimate drummer-friendly mount, offering non-slip positioning virtually anywhere. It also permits tuning of the bottom head by simply rotating the drum.

New Stage Custom also adopts die-cast claw hooks with rubber insertion plates to reduce noises. The bass drum legs of Stage Custom have special stoppers to make setting easier. all the heads are Remo which ensures reliable and consistent tone and performance