Birch wood construction offers a cutting low-end sound

The Yamaha Stage Custom shells are constructed from 6 plies of 100 birch wood which is a classic wood choice for drums because of its boosted high frequencies and good low end. It's ideal for applications requiring extra presence and cut. It's a classic choice for high end drum kits but the Stage Custom is affordable enough for anyone from students to more established players.

Compact size - ideal for travel

These small diameter shells deliver the Stage Custom sound without compromise. They are ideal for jazz, light sessions work and small venues or as a great all-round second kit for a wide variety of musical styles. The shells can be tuned higher and make less noise than bigger drums, making them perfect for music that requires something 'light and tight'.

Yamaha Hardware

The tom is mounted via the YESS system which helps eliminate potential dampening that happens when the hardware is drilled directly into the shell and gives the tom more resonance and volume.

A tribute to Yamaha design technology, their original ball mount and clamp has gone through very few modifications over the years. A large, ultra-hard resin ball sits in an attractive chromed housing, held in place with a titanium ergonomic wing bolt. It is the ultimate drummer-friendly mount, offering non-slip positioning virtually anywhere. It also permits tuning of the bottom head by simply rotating the drum.

New Stage Custom also adopts die-cast claw hooks with rubber insertion plates to reduce noises. The bass drum legs of Stage Custom have special stoppers to make setting easier. all the heads are Remo which ensures reliable and consistent tone and performance.

Configuration

• Bass Drum: 20'' x 8''
• Floor/Snare: 13'' x 8''
• Rack Tom: 10'' x 5''
• Snare Drum: 13'' x 5''

Specifications

• Shell Construction: 100 Percent 6-Ply Birch
• Shell Sizes: 20'', 13'', 13'', 10''
• Hoops: Triple Flange Hoop Steel / 1.5mm (FT/RT) & Wood Hoop (BD)
• Lugs: One-piece with Lug Insertion Plate
• Clamp: All Round Ball Clamp (Long Rod)
• Included Equipment: Tom Mount
• Finish: Natural Wood

The SONIClear™ technology used on the rack tom mounts and floor tom legs increases overall resonance by preserving vibration in the drumheads and shell whilst preventing energy transference to the hardware. This gives 100% breathing room for your hybrid shells to sing with the utmost resonance for an impressively musical and ‘full’ tone.

Features

• Birch / maple / birch hybrid shells give you crisp, cutting tone balanced with a deep, warm tone for a ‘full’ and musical sound
• SONIClear™ tom suspension and floor tom feet give you maximum resonance
• SONIClear™ bearing edge provide great tuning stability and a stronger drum sound
• Minimal contact hardware allows your drums natural tone to be heard
• Black Dawn finish provides a bold lacquered appearance for your stage shows

Configuration

• Snare drum: 14’’ x 5.5’’
• Bass drum: 22’’ x 18’’
• Rack tom 1: 10’’ x 7’’
• Rack tom 2: 12’’ x 8’’
• Floor tom 1: 14’’ x 12’’
• Floor tom 2: 16’’ x 14’’

Specifications

• Shells: Birch / maple / birch
• Snare shell: steel
• Shell ply:
• Toms: 6-ply 7.2mm
• Bass drum: 8-ply
• Hoops: 2.3mm Powerhoop
• Bearing edge: SONIClear™
• Finish: Black Dawn

A compact sized kit that is perfect for travel, busking and home practice. The Yamaha Stage Custom Hip shell pack features 6-ply birch wood construction for a cutting low-end sound that balances out with sustained overtones. The floor tom is equipped with 20-strand snare wires, allowing you to transform your floor tom into a deep, 13” snare drum with only a single action! Cool AF!

Hip Shell Pack Sizes:

• Bass Drum: 20” x 8”
• Floor Tom: 13” x 8”
• Rack Tom: 10” x 5”
• Snare Drum: 13″ x 5″
• Hardware: CL945LB Tom Arm

Specifications:

• Shell Construction: 6-Ply Birch
• Hoops: Triple Flange Hoop Steel / 1.5mm (FT/RT) & Wood Hoop (BD)
• Lugs: One-piece with Lug Insertion Plate
• Clamp: All Round Ball Clamp (Long Rod)
• Included Equipment: Tom Mount

Compact size – ideal for travel

These small diameter shells deliver the Stage Custom sound without compromise. They are ideal for jazz, light sessions work and small venues or as a great all-round second kit for a wide variety of musical styles. The shells can be tuned higher and make less noise than bigger drums, making them perfect for music that requires something ‘light and tight’.

Yamaha hardware

The tom is mounted via the YESS system which helps eliminate potential dampening that happens when the hardware is drilled directly into the shell and gives the tom more resonance and volume.

A tribute to Yamaha design technology, their original ball mount and clamp has gone through very few modifications over the years. A large, ultra-hard resin ball sits in an attractive chromed housing, held in place with a titanium ergonomic wing bolt. It is the ultimate drummer-friendly mount, offering non-slip positioning virtually anywhere. It also permits tuning of the bottom head by simply rotating the drum.

New Stage Custom also adopts die-cast claw hooks with rubber insertion plates to reduce noises. The bass drum legs of Stage Custom have special stoppers to make setting easier. all the heads are Remo which ensures reliable and consistent tone and performance

The revolutionary "Halo" mount, a lateral, unique "under lug-line" suspension system, unlocks the freedom of full resonance and allows the drum to sing with an open, pure tone. The Adjustment Knob acts as a built-in Equalizer that can slightly dampen the resonance of the shell, producing a tighter and quicker decay. Whether you like to go dry in a jazz gig, or sound huge in a packed arena, the Saturn Evolution has the whole package for you.

FEATURES

• Brunswick Green (SAS-1)
• Birch/Walnut/Birch Shell, with Halo Mount
• 22x16, 10x7, 12x8, 16x14ft, TH800 x 2

FREE BLACK PANTHER SNARE DRUM WITH THIS KIT*

Simply purchase and take delivery of your new Saturn Evolution kit between now and the end of January 2022 and claim your choice of either the beautiful copper shelled BP Predator, or the wonderfully articulate aluminium shelled Atomizer.

T&Cs apply, UK and Ireland residents only. For full details visit: https://korguk.com/saturnevolution/

This kit is shipped directly from Mapex and isn't in stock at our Horncastle store. Please allow up to 5 days for delivery. 

The revolutionary "Halo" mount, a lateral, unique "under lug-line" suspension system, unlocks the freedom of full resonance and allows the drum to sing with an open, pure tone. The Adjustment Knob acts as a built-in Equalizer that can slightly dampen the resonance of the shell, producing a tighter and quicker decay. Whether you like to go dry in a jazz gig, or sound huge in a packed arena, the Saturn Evolution has the whole package for you.

FEATURES

• Exotic Azure Burst (SAS-2)
• Birch/Walnut/Birch Shell, with Halo Mount and Exotic Outer Veneer
• 22x18, 10x8, 12x9, 16x16ft, TH800 x 2

FREE BLACK PANTHER SNARE DRUM WITH THIS KIT*

Simply purchase and take delivery of your new Saturn Evolution kit between now and the end of January 2022 and claim your choice of either the beautiful copper shelled BP Predator, or the wonderfully articulate aluminium shelled Atomizer.

T&Cs apply, UK and Ireland residents only. For full details visit: https://korguk.com/saturnevolution/

This kit is shipped directly from Mapex and isn't in stock at our Horncastle store. Please allow up to 5 days for delivery. 

The revolutionary "Halo" mount, a lateral, unique "under lug-line" suspension system, unlocks the freedom of full resonance and allows the drum to sing with an open, pure tone. The Adjustment Knob acts as a built-in Equalizer that can slightly dampen the resonance of the shell, producing a tighter and quicker decay. Whether you like to go dry in a jazz gig, or sound huge in a packed arena, the Saturn Evolution has the whole package for you.

FEATURES

• Exotic Azure Burst (SAS-2)
• Hybrid; Maple/Walnut Bass Drum, Birch/Walnut Toms, with Halo Mount and Exotic Outer Veneer
• 22x16 (M/W), 12x8 (B/W), 16x16ft (B/W), TH800

FREE BLACK PANTHER SNARE DRUM WITH THIS KIT*

Simply purchase and take delivery of your new Saturn Evolution kit between now and the end of January 2022 and claim your choice of either the beautiful copper shelled BP Predator, or the wonderfully articulate aluminium shelled Atomizer.

T&Cs apply, UK and Ireland residents only. For full details visit: https://korguk.com/saturnevolution/

This kit is shipped directly from Mapex and isn't in stock at our Horncastle store. Please allow up to 5 days for delivery. 

The revolutionary "Halo" mount, a lateral, unique "under lug-line" suspension system, unlocks the freedom of full resonance and allows the drum to sing with an open, pure tone. The Adjustment Knob acts as a built-in Equalizer that can slightly dampen the resonance of the shell, producing a tighter and quicker decay. Whether you like to go dry in a jazz gig, or sound huge in a packed arena, the Saturn Evolution has the whole package for you.

FEATURES

• Gun Metal Grey (SAS-0)
• Hybrid; Maple/Walnut Bass Drum, Birch/Walnut Toms, with Halo Mount
• 22x16 (M/W), 12x8 (B/W), 16x16ft (B/W), TH800

FREE BLACK PANTHER SNARE DRUM WITH THIS KIT*

Simply purchase and take delivery of your new Saturn Evolution kit between now and the end of January 2022 and claim your choice of either the beautiful copper shelled BP Predator, or the wonderfully articulate aluminium shelled Atomizer.

T&Cs apply, UK and Ireland residents only. For full details visit: https://korguk.com/saturnevolution/

This kit is shipped directly from Mapex and isn't in stock at our Horncastle store. Please allow up to 5 days for delivery. 

Yamaha Birch Stage Custom drum kit shell pack at Into Music Drum Store. 

• Stage Custom Series
• High gloss lacquered 6-ply birch wood shells
• Y.E.S.S. tom mount system
• Absolute lugs
• Steel hoops
• Redesigned bass drum feet
• Chrome hardware
• Colour: Natural Wood

20" Bass Drum set:

• 20" x 17" Bass drum with TH945B double tom holder
• 10" x 07" Tom tom
• 12" x 08" Tom tom
• 14" x 13" Floor tom
• 14" x 5.5" Snare drum

20" Bass Drum set:

• 10x7in Tom
• 12x8in Tom
• 16x15in Floor Tom
• 22x17in Bass Drum
• 14×5.5in Snare Drum
• TH945B Double Tom Holder

Other hardware and cymbals not included!

Speak to us today about adding a Yamaha hardware pack

The Classic Saturn Sound just got even better, the latest Mapex Saturn series shell packs blend time-honored maple/walnut shells with bleeding-edge shell tech borrowed for the Black Panther Design Lab, along with jaw-dropping finishes to please a wide range of drummer tastes. Each piece in this set has been molded to meet the needs of stage and studio professionals. You get thin 6-ply hybrid shells crowned with Mapex's precision SONIClear bearing edges, Remo USA heads, and Mapex Power Hoops to deliver splendid tone and tuneability from day one. You also get Mapex's advanced shell venting, suspension tom mounting, and floating SAS floor tom legs for excellent note length and projection. Factor in those iconic Saturn Series badges and lugs and it's a clear winner of a drum kit.

• 6-Ply maple/walnut shells: Classic Saturn sound utilizing the thin maple-walnut foundation, 4-ply maple on the outside for clear projection, and a core or 2-ply walnut for big deep darkness and resonance both of which pack strong attack and rich sustain
• SONIClear bearing edges: awesome tone and easier tuning, enough said really but the science is that this cut allows for the heads to sit a lot flatter on the bearing edge this results in better seating and stronger, deeper fundamental note, this widens the tuning range for players who like deeper toms and kick drums while producing purer musical pitches in higher registers

Hardware

• Mapex Power Hoops: steel 2.3mm triple-flanged Power Hoops give the shells some weight and durability to survive the battering they shall inevitably receive
• Air Flow Venting: the air vents are placed at the Nodal line with the lugs, as to not affect the resonance of the shells if they were placed in the center of the drum, this is borrowed from the Black Panther Design Lab. It gives each drum an open lively response and maximizes shell resonance
• SAS static floor tom legs: sound and vibrations work on the principle "The shortest path between two points is a straight line". Mapex SAS floor tom legs feature a sharp 90-degree angle to increase the distance from the floor to the shell. This allows more sustain from floor toms instead of the note being absorbed into the floor, even the rubber feet act as a spring, elevating the floor tom off the floor maximizing resonance
• SONIClear suspension mounts: these are low-profile mounts that prevent energy from the tom from being absorbed into the hardware and do not touch the tension rods in any way. this means the tom sustain never gets choked, heads stay in tune longer, and head changes are quicker with no need to remove shells from mounts

Please note: this is a shell pack only, you can buy hardware separately here

Configuration

• Bass Drum: 22" x 18"
• Rack Tom: 10" x 8"
• Rack Tom: 12" x 9"
• Floor Tom: 14" x 12" & 16" x 14"
• Tom Holder: TH800 x 2
• Floor Tom Legs: Included

The latest evolution in Mapex’s Saturn Series features a variety of shells, providing an unrivalled tonal range. Choose from Birch/Walnut for cutting, controlled attack or Maple/Walnut for warmth and depth. Want the best of both worlds? Then go for a hybrid blend with a Maple/Walnut kick and Birch/Walnut toms.  Chamber Specific Shell Construction creates a defined and satisfying sonic character. It’s unique Halo suspension mounting system gives your rack toms their own rings of Saturn and allows you to control the resonance. Go dry and controlled or go for epic rock resonance, the choice is yours.

The Mapex Saturn Evolution is available in a wide variety of classy finishes and configurations to suit your style and taste.  The finish on this kit is the stunning, Exotic Violet Burst.

• 22×18 (Birch/Walnut) Kick Drum
• 10×8 (Birch/Walnut) Rack Tom
• 12×9  (Birch/Walnut) Rack Tom
• 14×14 (Birch/Walnut) Floor Tom
• 16×16 (Birch/Walnut) Floor Tom
• TH800 x2 – Tom Mounts

21st century build quality with timeless vintage look and feel. Preferred by professionals for its tonal versatility, Classic Maple drums are the ideal choice for any performance application.

• Shell: 7-ply Cross-Laminated North American Maple. Its high sensitivity, wide dynamic tuning range, and sharp attack make it the ideal choice for live performance. Yet Classic Maple's 7-ply shell is crafted to respond to the player and environment quickly, making it adaptable to any playing style or preference.

• Bearing Edge: Each drum's bearing edge is cut to a 45-degree angle within 1/16" from the outside edge. This sharp edge is hand-sanded to the craftsman's touch to assure a smooth, even, flat surface for easy head seating; the final touch to complete the unmistakable Ludwig Sound.

• RFST Moulding: Classic Maple's standard 7-ply, 6mm shell is formulated for optimum resonance and tonality. Its center three-ply core panel (laminated in a horizontal/vertical/horizontal grain bond to a 2.4mm thickness,) is inserted between inner and outer two-ply panels through their proprietary RFST molding process. 

To increase stability through out the drum, all Ludwig USA shells are produced using Radio Frequency Shell Technology. Using a process involving the original bladder molds, R.F.S.T.'s unique bonding system -combined with a specialized, time-tested adhesive- cures each shell evenly over the entire surface of the shell. This process is truly a principal ingredient in creating the "Ludwig Sound" in every shell they make.

Made in Monroe, NC. USA

Included in this shell pack: 

• 22"x14" Bass Drum.
• 13"x09" Rack Tom
• 16"x16" Floor Tom.
• x3 Floor Tom Legs 

(Ex display) Ludwig classic oak drum kit in white marine. We believe this to be the only one available in the uk in this finish at the moment!!

FEATURES

3-piece drum shell pack with rack tom, floor tom and kick

5-ply, 6.5 mm shells made from maple and oak for extra-dark sound

Double-cut 45° bearing edges contribute to quick, punchy decay

Made in the USA

Cymbals, snare and cymbal stand not included

Includes

20 x 14 BD

14 x 14 FT

12 x 8 TT

Part of the reimagined Classic Oak drum series, this Ludwig Downbeat 3-piece shell pack lives up to the timeless Ludwig name with high-end construction and dark, aggressive sound. The shell consists of a 3-ply core of North American Maple, surrounded by single inner and outer plies of American Red Oak. The total of 5 wood plies keeps the shells thin at 6.5 mm, increasing the dark resonance and speeding up the decay for clear articulation on every stroke. Shells are cut to dual 45-degree bearing edges. This "Downbeat" configuration features a rack tom, floor tom and bass drum in fusion sizes, especially good for situations that reward subtlety and precision. Cymbals, snare drum and hardware are not included with this high-end professional shell pack. No matter the genre, Ludwig Classic Oak gives drummers a more powerful voice in the mix. Proudly made in Monroe, North Carolina, USA.

The Armory Series is the latest realisation of the Mapex hybrid shell concept. A fusion of birch and maple delivers the ultimate tonal expression, and the SONIClear™ bearing edge allows the drumhead to sit flat, bringing out the best response by optimising the relationship between head and shell.

The Birch/Maple/Birch 6Ply 7.2mm shell with the new SONIClear™ Bearing Edge allows for the direct transmission of sound, reduces unwanted frequencies and provides a strong fundamental pitch and an effortless tuning experience especially at lower tunings.

The SONIClear™ tom suspension and floor tom feet increase overall resonance by preserving vibration in the shell and keeping stress away from the tension rods, helping the heads stay in tune.

This kits contains

22"x18" Bass Drum

8”x7” Rack Tom

10"x08" Rack Tom

12"x09" Rack Tom

16"x16" Floor Tom

14"x5.5" Tomahawk Snare Drum

x2 TH800 Tom Arms

x3 Floor Tom Legs

**Cymbals & Hardware NOT Included**

There's no shortage of reasons why the Yamaha Tour Custom 22” 5-Piece Shell Pack is considered one of the best kits on the market for the touring drummer. This kit is built to last, designed to handle all of the physical challenges that life on the road presents. 

These versatile drums possess a highly articulate voice and wide tonal range ideal for recording, but it is the kit's sonic range, resonance and power that really makes it superior on a stage. It’s rare that you will encounter a kit so adept at both live and studio use, but the Tour Custom has nailed it.

This Tour Custom shell pack features a 22 x 16” bass drum, two bass drum mounted toms and two floor toms. Each of these highly expressive 6-ply all-Maple shells generates a warm, bright tone that balances perfectly with its levels of response and sustain. They also feature a 45-degree bearing edge, 2.3mm Inverse Dyna Hoops, Absolute Lugs and YESS mounts, all designed to enhance and balance the shell’s natural sustain and dynamic range. The YESS mount is a great piece of minimalist design that offers maximum support for your toms while allowing them maximum freedom to resonate, eliminating vibration transfer to make sure your shell doesn't choke and can ring freely. Inverse Dyna Hoops help to focus the beautiful tone of your shells and eliminate any unwanted overtones.

This 5-piece shell pack is finished in a sultry Candy Apple Satin lacquer that enhances the sonic potential of these exquisite, all-purpose drums.

CONFIGURATION:

• 22 x 16" Bass Drum (drilled)
• 16 x 15" Floor Tom + Legs
  
• 12 x 8" Rack Tom
• 10 x 7" Rack Tom
• TH945 Tom Holder

The Armory Series is the latest realisation of the Mapex hybrid shell concept. A fusion of birch and maple delivers the ultimate tonal expression, and the SONIClear™ bearing edge allows the drumhead to sit flat, bringing out the best response by optimising the relationship between head and shell.

The Birch/Maple/Birch 6Ply 7.2mm shell with the new SONIClear™ Bearing Edge allows for the direct transmission of sound, reduces unwanted frequencies and provides a strong fundamental pitch and an effortless tuning experience especially at lower tunings.

The SONIClear™ tom suspension and floor tom feet increase overall resonance by preserving vibration in the shell and keeping stress away from the tension rods, helping the heads stay in tune.

This kits contains

22"x18" Bass Drum

8x7” Rack Tom

10"x08" Rack Tom

12"x09" Rack Tom

16"x16" Floor Tom

14"x5.5" Tomahawk Snare Drum

x2 TH800 Tom Arms

x3 Floor Tom Legs

**Cymbals & Hardware NOT Included**

The Armory Series is the latest realisation of the Mapex hybrid shell concept. A fusion of birch and maple delivers the ultimate tonal expression, and the SONIClear™ bearing edge allows the drumhead to sit flat, bringing out the best response by optimising the relationship between head and shell.

The Birch/Maple/Birch 6Ply 7.2mm shell with the new SONIClear™ Bearing Edge allows for the direct transmission of sound, reduces unwanted frequencies and provides a strong fundamental pitch and an effortless tuning experience especially at lower tunings.

The SONIClear™ tom suspension and floor tom feet increase overall resonance by preserving vibration in the shell and keeping stress away from the tension rods, helping the heads stay in tune.

This kits contains

22"x18" Bass Drum

10"x07" Rack Tom

12"x08" Rack Tom

14"x12" Floor Tom

16"x14" Floor Tom

14"x5.5" Tomahawk Snare Drum

x2 TH800 Tom Arms

x6 Floor Tom Legs

**Cymbals & Hardware NOT Included**

The Armory Series is the latest realisation of the Mapex hybrid shell concept. A fusion of birch and maple delivers the ultimate tonal expression, and the SONIClear™ bearing edge allows the drumhead to sit flat, bringing out the best response by optimising the relationship between head and shell.

The Birch/Maple/Birch 6Ply 7.2mm shell with the new SONIClear™ Bearing Edge allows for the direct transmission of sound, reduces unwanted frequencies and provides a strong fundamental pitch and an effortless tuning experience especially at lower tunings.

The SONIClear™ tom suspension and floor tom feet increase overall resonance by preserving vibration in the shell and keeping stress away from the tension rods, helping the heads stay in tune.

This kits contains

22"x18" Bass Drum

10"x07" Rack Tom

12"x08" Rack Tom

14"x12" Floor Tom

16"x14" Floor Tom

14"x5.5" Tomahawk Snare Drum

x2 TH800 Tom Arms

x6 Floor Tom Legs

**Cymbals & Hardware NOT Included**

The Armory Series is the latest realisation of the Mapex hybrid shell concept. A fusion of birch and maple delivers the ultimate tonal expression, and the SONIClear™ bearing edge allows the drumhead to sit flat, bringing out the best response by optimising the relationship between head and shell.

The Birch/Maple/Birch 6Ply 7.2mm shell with the new SONIClear™ Bearing Edge allows for the direct transmission of sound, reduces unwanted frequencies and provides a strong fundamental pitch and an effortless tuning experience especially at lower tunings.

The SONIClear™ tom suspension and floor tom feet increase overall resonance by preserving vibration in the shell and keeping stress away from the tension rods, helping the heads stay in tune.

This kits contains

22"x18" Bass Drum

10"x07" Rack Tom

12"x08" Rack Tom

14"x12" Floor Tom

16"x14" Floor Tom

14"x5.5" Tomahawk Snare Drum

x2 TH800 Tom Arms

x6 Floor Tom Legs

**Cymbals & Hardware NOT Included**

The Mapex Venus 20'' 5pc Drum Kit includes:

- 20'' x 16'' bass drum

- 10'' x 7'' rack tom

- 12'' x 8'' rack tom

- 14'' x 12'' floor tom

- 14'' x 5'' snare drum.

The Mapex Venus 22'' 5pc Drum Kit includes:

- 22'' x 16'' bass drum

- 10'' x 7'' rack tom

- 12'' x 8'' rack tom

- 16'' x 14'' floor tom

- 14'' x 5'' snare drum

FEATURES

• Poplar Shell - 9-Ply, 7.2mm Poplar shell offers a full, warm sound
• REMO Drumheads - Venus series is equipped with REMO drumheads ensuring a pure tone from every drum shell with every stroke
• Mini B-Lug - Inspired by the style of B lugs from the Saturn Evolution Series, the new Mini B-Lug makes tuning smooth and easy
• TH652 Double Tom Holder - Offers easy positioning, multi-angle adjustment, and user-friendly experience to get your toms set up quickly and securely
• Mapex Hammered Brass Cymbals - The 14” hammered brass hi-hat pair and the 18” hammered brass crash/ride produces a warm cymbal sound rich with harmonics fitting perfectly with most genres of music
• P410 Single Bass Drum Pedal - Features solid base plate construction for both durability and a secure, comfortable performance outpacing most pedals in its class. Single chain drive with adjustable spurs, a reversible and angle adjustable beater and a full-sized footboard for a performance worthy feel
• H410 Hi-Hat Stand - The direct-pull-chain-drive mechanism creates a smooth and responsive feel while the simple and strong hi-hat clutch keeps the top cymbal in place. The angle-adjustable seat cup gives authentic hi-hat function and sound.

The Mapex Venus 20'' 5pc Drum Kit includes:

- 20'' x 16'' bass drum

- 10'' x 7'' rack tom

- 12'' x 8'' rack tom

- 14'' x 12'' floor tom

- 14'' x 5'' snare drum.

The Mapex Venus 22'' 5pc Drum Kit includes:

- 22'' x 16'' bass drum

- 10'' x 7'' rack tom

- 12'' x 8'' rack tom

- 16'' x 14'' floor tom

- 14'' x 5'' snare drum

FEATURES

• Poplar Shell - 9-Ply, 7.2mm Poplar shell offers a full, warm sound
• REMO Drumheads - Venus series is equipped with REMO drumheads ensuring a pure tone from every drum shell with every stroke
• Mini B-Lug - Inspired by the style of B lugs from the Saturn Evolution Series, the new Mini B-Lug makes tuning smooth and easy
• TH652 Double Tom Holder - Offers easy positioning, multi-angle adjustment, and user-friendly experience to get your toms set up quickly and securely
• Mapex Hammered Brass Cymbals - The 14” hammered brass hi-hat pair and the 18” hammered brass crash/ride produces a warm cymbal sound rich with harmonics fitting perfectly with most genres of music
• P410 Single Bass Drum Pedal - Features solid base plate construction for both durability and a secure, comfortable performance outpacing most pedals in its class. Single chain drive with adjustable spurs, a reversible and angle adjustable beater and a full-sized footboard for a performance worthy feel
• H410 Hi-Hat Stand - The direct-pull-chain-drive mechanism creates a smooth and responsive feel while the simple and strong hi-hat clutch keeps the top cymbal in place. The angle-adjustable seat cup gives authentic hi-hat function and sound.

The Mapex Venus 20'' 5pc Drum Kit includes:

- 20'' x 16'' bass drum

- 10'' x 7'' rack tom

- 12'' x 8'' rack tom

- 14'' x 12'' floor tom

- 14'' x 5'' snare drum.

The Mapex Venus 22'' 5pc Drum Kit includes:

- 22'' x 16'' bass drum

- 10'' x 7'' rack tom

- 12'' x 8'' rack tom

- 16'' x 14'' floor tom

- 14'' x 5'' snare drum

FEATURES

• Poplar Shell - 9-Ply, 7.2mm Poplar shell offers a full, warm sound
• REMO Drumheads - Equipped with REMO drumheads ensuring a pure tone from every drum shell with every stroke
• Mini B-Lug - Inspired by the style of B lugs from the Saturn Evolution Series, the new Mini B-Lug makes tuning smooth and easy
• TH652 Double Tom Holder - Offers easy positioning, multi-angle adjustment, and user-friendly experience to get your toms set up quickly and securely
• Mapex Hammered Brass Cymbals - The 14” hammered brass hi-hat pair and the 18” hammered brass crash/ride produces a warm cymbal sound rich with harmonics fitting perfectly with most genres of music
• P410 Single Bass Drum Pedal - Features solid base plate construction for both durability and a secure, comfortable performance outpacing most pedals in its class. Single chain drive with adjustable spurs, a reversible and angle adjustable beater and a full-sized footboard for a performance worthy feel
• H410 Hi-Hat Stand - The direct-pull-chain-drive mechanism creates a smooth and responsive feel while the simple and strong hi-hat clutch keeps the top cymbal in place. The angle-adjustable seat cup gives authentic hi-hat function and sound.

The Ludwig Classic Maple 3pc Shell Pack is a versatile kit from Ludwig and is part of their acclaimed Classic Maple series of drums. The kit features high-quality North American maple shells with durable chrome hardware and a stunning sky blue pearl finish. The 7-ply, 6mm North American maple shells are cross laminated for enhanced shell structure and strength, offering a versatile tone with a high sensitivity and sharp attack. Easily adaptable to a wide range of drumming styles and genres, the Classic Maple shells feature a 45-degree bearing edge and are fitted with durable chrome hardware including hoops and mini-classic lugs. Handmade in Monroe, NC. USA, the Classic Maple drums put a modern twist on the classic art of American drum building.

Please note: Cymbals, Snare and hardware not included.

Features

• North American maple shells
• 45 degree bearing edges
• Mini-classic lugs
• Elite bass drum spurs
• ATLAS tom mounts
• Cast brass badges
• Specifications
  

• Shell Construction: 7-Ply, 6mm North American Maple
• Hardware: Chrome
• Bearing Edge: Dual 45 Degree
• Lugs: Mini-Classic Lugs
• Spurs: Elite Spurs
• Badges: Cast Brass Badges

Downbeat sizes: 

20'' x 14" Bass Drum, 14" x 14" Floor Tom, and 12" x 8" Tom Tom

Fab Sizes: 

22" x 14" Bass Drum, 16" x 16" Floor Tom, and 13" x 9" Tom Tom

Pro Beat:

24'' x 14'' Bass Drum, 16'' x 16'' Floot Tom and 13'' x 9'' Tom Tom

The Ludwig Classic Maple 3pc Shell Pack is a versatile kit from Ludwig and is part of their acclaimed Classic Maple series of drums. The kit features high-quality North American maple shells with durable chrome hardware and a stunning sky blue pearl finish. The 7-ply, 6mm North American maple shells are cross laminated for enhanced shell structure and strength, offering a versatile tone with a high sensitivity and sharp attack. Easily adaptable to a wide range of drumming styles and genres, the Classic Maple shells feature a 45-degree bearing edge and are fitted with durable chrome hardware including hoops and mini-classic lugs. Handmade in Monroe, NC. USA, the Classic Maple drums put a modern twist on the classic art of American drum building.

Please note: Cymbals, Snare and hardware not included.

Features

• North American maple shells
• 45 degree bearing edges
• Mini-classic lugs
• Elite bass drum spurs
• ATLAS tom mounts
• Cast brass badges
• Specifications
  

• Shell Construction: 7-Ply, 6mm North American Maple
• Hardware: Chrome
• Bearing Edge: Dual 45 Degree
• Lugs: Mini-Classic Lugs
• Spurs: Elite Spurs
• Badges: Cast Brass Badges

Downbeat sizes: 

20'' x 14" Bass Drum, 14" x 14" Floor Tom, and 12" x 8" Tom Tom

Fab Sizes: 

22" x 14" Bass Drum, 16" x 16" Floor Tom, and 13" x 9" Tom Tom

Pro Beat:

24'' x 14'' Bass Drum, 16'' x 16'' Floot Tom and 13'' x 9'' Tom Tom

Each of these kits comes with:

- 1 x Hi-hat Stand

- 1 x Snare Stand

- 2 x Boom Stands

- 1 x Bass Drum Pedal

- 1 x Throne

Each of these kits comes with:

- 1 x Hi-hat Stand

- 1 x Snare Stand

- 2 x Boom Stands

- 1 x Bass Drum Pedal

- 1 x Throne

Each of these kits comes with:

- 1 x Hi-hat Stand

- 1 x Snare Stand

- 2 x Boom Stands

- 1 x Bass Drum Pedal

- 1 x Throne

Each of these kits comes with:

- 1 x Hi-hat Stand

- 1 x Snare Stand

- 2 x Boom Stands

- 1 x Bass Drum Pedal

- 1 x Throne

Each of these kits comes with:

- 1 x Hi-hat Stand

- 1 x Snare Stand

- 2 x Boom Stands

- 1 x Bass Drum Pedal

- 1 x Throne

Each of these kits comes with:

- 1 x Hi-hat Stand

- 1 x Snare Stand

- 2 x Boom Stands

- 1 x Bass Drum Pedal

- 1 x Throne

22″ 6-piece: 22″ x 18″ bass drum, 14″ x 14″ and 16″ x 16″ floor toms, 10″ x 8″ and 12″ x 9″ rack toms, and 14″ x 5″ snare drum

Each of these kits comes with:

- 1 x Hi-hat Stand

- 1 x Snare Stand

- 2 x Boom Stands

- 1 x Bass Drum Pedal

- 1 x Throne

22″ 6-piece: 22″ x 18″ bass drum, 14″ x 14″ and 16″ x 16″ floor toms, 10″ x 8″ and 12″ x 9″ rack toms, and 14″ x 5″ snare drum

Each of these kits comes with:

- 1 x Hi-hat Stand

- 1 x Snare Stand

- 2 x Boom Stands

- 1 x Bass Drum Pedal

- 1x Throne

A compact sized kit that is perfect for travel, busking and home practice. The Yamaha Stage Custom Hip 20'' 4pc Shell Pack includes a 20'' x 8'' bass drum, 13'' x 8'' floor tom with snare wires, 10'' x 5'' rack tom, and a 13'' x 5'' snare drum. With 100 percent 6-ply birch wood construction, the Yamaha Stage Custom Hip Shell Pack offers a cutting low-end sound that balances out with sustained overtones. This shell pack is perfectly completed by an EAD10 Drum Module or Yamaha's ''Crosstown'' lightweight hardware pack.

The floor tom is equipped with 20-strand snare wires, allowing you to transform your floor tom into a deep, 13'' snare drum with only a single action.

• Free protection case set valid for a limited time only. Cases will be sent separately from the uk warehouse. 
• Redefining the original sound of oak with a new hybrid shell, the new Live Custom Hybrid Oak enhances the dynamic range by accentuating its attack and projection and incorporates the traditional Japanese Uzukuri handcrafted shell finishing, creating a unique look that defines the expression of oak. The Live Custom Hybrid Oak shell concept is borrowed from Yamahas flagship PHX and Absolute Hybrid Maple kits, which feature a dense phenolic sheet sandwiched between two sheets of oak ply. Always a pioneer in the field of oak drums, Yamaha has enhanced the dynamic range of the new Live Custom by accentuating its attack and projection. The traditional Japanese finishing technique known as Uzukuri has been modified for use on drum shells. In this procedure, the soft areas in the wood grain are sanded and the entire shell is coated with a thin layer of black paint. The surface of the shell is sanded again before the final coating is applied in a process that emphasises the natural beauty of the oak grain. Dark Silver hardware delivers a dominating image further enhanced by black shell interiors. Thicker steel hoops offer a tighter sound and sharper response, and toms and floor toms are equipped with clear Remo Emperor heads, which are known for their deep sound and great durability.
•  7-Ply hybrid oak shell (center phenolic ply)
•  Traditional Japanese Uzukuri Charcoal Sunburst Finish
• Bass enhancement weight
• YESS III tom mounting system
• Dark chrome hardware
• Absolute single-post lug
• 2.3 mm steel DynaHoops

Sizes:

• 10x7in Tom
• 12x8in Tom
• 16x15in Floor Tom
• 22x16in Bass Drum
• TH945B Tom Holder Included